Abaqus Error: The executable standard.exe aborted with system error code 5296979

[DRAI]

Hi everybody,
with abaqus 6.12 on windows 7-64 bit, I run elastic static analysis with
a model of about 30.000.000 tet elements and about 30.000.000 nodes, it
was written 90.000.000 degrees of freedom, after eliminating issues,
the Input File Processor was succefull, but after about 4 hours from
starting the executable standard there are a messeage saying (problem
with meGUI and C++...) AND standard.exe aborted with system error code
5296979. please I need help, I need to know what's wrong,

"Abaqus JOB jib
Abaqus 6.12-1
Abaqus License Manager checked out the following licenses:
Abaqus/Standard checked out 5 tokens.
<1019 out of 1024 licenses remain available>.
Begin Analysis Input File Processor
03/08/2013 04:34:31
Run pre.exe
03/08/2013 05:38:07
End Analysis Input File Processor
Begin Abaqus/Standard Analysis
03/08/2013 05:38:07
Run standard.exe
03/08/2013 10:08:55
Abaqus Error: The executable standard.exe
aborted with system error code 529697949.
Please check the .dat, .msg, and .sta files for error messages if the
files
exist. If there are no error messages and you cannot resolve the
problem,
please run the command "abaqus job=support information=support" to
report and
save your system information. Use the same command to run Abaqus that
you
used when the problem occurred. Please contact your local Abaqus
support
office and send them the input file, the file support.log which you just
created, the executable name, and the error code.
Abaqus/Analysis exited with errors"




[Non-text portions of this message have been removed]

[Dave Lindeman]

That's an enormous model -- the kind of thing a national lab would run
on a huge cluster. The error code is almost undoubtedly related to a
memory error. How many GB of RAM do you have on this machine?

Dave Lindeman
Lead Research Specialist
3M Company
3M Center 235-3F-08
St. Paul, MN 55144
651-733-6383

Post by DRAI
Hi everybody,
with abaqus 6.12 on windows 7-64 bit, I run elastic static analysis with
a model of about 30.000.000 tet elements and about 30.000.000 nodes, it
was written 90.000.000 degrees of freedom, after eliminating issues,
the Input File Processor was succefull, but after about 4 hours from
starting the executable standard there are a messeage saying (problem
with meGUI and C++...) AND standard.exe aborted with system error code
5296979. please I need help, I need to know what's wrong,
"Abaqus JOB jib
Abaqus 6.12-1
Abaqus/Standard checked out 5 tokens.
<1019 out of 1024 licenses remain available>.
Begin Analysis Input File Processor
03/08/2013 04:34:31
Run pre.exe
03/08/2013 05:38:07
End Analysis Input File Processor
Begin Abaqus/Standard Analysis
03/08/2013 05:38:07
Run standard.exe
03/08/2013 10:08:55
Abaqus Error: The executable standard.exe
aborted with system error code 529697949.
Please check the .dat, .msg, and .sta files for error messages if the
files
exist. If there are no error messages and you cannot resolve the
problem,
please run the command "abaqus job=support information=support" to
report and
save your system information. Use the same command to run Abaqus that
you
used when the problem occurred. Please contact your local Abaqus
support
office and send them the input file, the file support.log which you just
created, the executable name, and the error code.
Abaqus/Analysis exited with errors"
[Non-text portions of this message have been removed]

[Non-text portions of this message have been removed]

[[e-mail] [Abaqus]]

Check a model with 1 element, or a few elements. If ti runs, your problem is memory. Parallel processing uses much more memory than single processor, so a job that runs on cpus=1 may not run on cpus=4.

[[e-mail] [Abaqus]]

Hi I Have a same question about error code 529697949. After changing parameters in Abaqus with a simple model I found out the problem is Predefined Field that I have made. when I deactivate it the job will complete but when the predefined field is active this error will appear. My predefined Fields are the same predefined fields that I have define without any problem. But I don't know what should I do to solve this.

[Mr_Mz [e-mail] [Abaqus]]

I know the thread in getting old.. but I got this error a few days ago... did nothing with the computer, just opened Abaqus and ran the job again and it is working now